Hard disk drive tester HDD tester SSD tester flexstar Start Price USD 12,999.00 Current Price USD 12,999.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Friday, October 10, 2008 End Time Monday, October 20, 2008 Location San Ramon, California See more about 'Hard disk drive tester HDD tester SSD tester flexstar' Description This auction is for a new Flexstar Ambient Test Systems  4 U hight 12 slots to test 12 2.5 inch drives at a time, other systems for a 3.5 in drive(s) are also available. We built a lot of these up for a special project and a few were deemed surplus. These noramlly sell for around $15K One of the best features of this unit is that the  drives are all tested under thier own script  and run independtly so you do not have to wait until all the drives are finsished before you insert the next one. (Cheap testers tend to run batches and are serial in thier testing, life is to short for this) You can also test drives from a number of manufactuers all at one time.Various scripts for RMA testing or QA testing are available.   The(ATS) deliver accurate testing with consistency over the widest range of different drive sizes, interfaces and capacity. The ATS can be correlated back to Flexstar environmental chambers and burn-in racks tests by using the same scripts.Comes with a full warranty and 1 year software lic. You do need to provide a computer to run the test software on. If you are in the SF bay area you can swing buy and pick this unit up. We will also provide a days worth of training and some testing scripts to get you up and running quickly. You can attend training in Longmont Colorado or Fremont California. Waiting until ski season is always a good choice for Colorado   For additional infrmation please go to www.flexstar.com or you can call us at 510-440-0170 ask for Chris VP proffesional Services for Flexstar. If I am not around the operator will take your name and number and I will get back to you. The well-proven Flexstar software simplifies testing with a familiar GUI and the ability to easily create and modify test scripts with no programming expertise required.Engineered from industry standard Flexstar products the ATS provides customers an excellent ability to test returned drives (RMA) or provide Failure Analysis (FA) engineers an easy to use desktop test system. The system is 19” rack mountable and up to 3 systems can be daisy chained together or an external network switch can be used to produce large scale testing environment.The combination of the Flexstar software, single board computer and three choices of power card options provide the flexibility that Flexstar is known for throughout the storage industry. Individual drive ports may be programmed to run different tests asynchronously. Failed drives can be debugged in place while other slots continue to run. The optional serial port data capture capability enables access to the device under test even if the interface is not responding.The Flexstar ATS supports all of the industry-standard storage device interfaces, including SCSI, SAS, FireWire, SATA, PATA, ATAPI and USB. The Flexstar advanced ambient testers enable flexible, accurate and repeatable mass ambient testing for any storage device. Product Specifications Input Power Requirements Voltage: 110VAC/220VAC Frequency: 50Hz/60Hz Mechanical Exterior Dimensions: 4U, 5U, 7U x 17.5w” x 26.78d” (44.5cm x 68.02cm) Weight: 4U/5U approx. 45Lbs., 7U approx. 52Lbs. Capacity: 4U: 12 x 2.5” or 1.8” drives the auction is for this one We also have the following for some extra cost 5U: 8 x 3.5” or smaller with some adapters that are cheap 7U: 12 x 3.5” or smaller with some adaopters that are cheap Environmental Ambient temperature range: to 25ºC Power Supply Options: Nominal Power Four nominal programmable voltages: 0V, 3.3V, 5.0V, and 12.0V +/- 2%. Network Power Margin II (NPM II) Current measurement range: 0 to 5 amps with 0.6 milliamps resolution Current measurement accuracy: +/- 1% of full scale Voltage measurement range: 0 to 15V with 3.6 mV resolution Voltage measurement read back accuracy: +/- 0.5% of full scale Power sampling: Up to 4096 samples for each channel Power sampling rate: 1 to 255 milliseconds in 1 millisecond increments On-board memory for power sampling data acquisition Power Supply Simulator (PSS) Available Q4/2008 Optional at extra cost Command Queuing: up to 256 commands or sequences, < +/- 0.5% accuracy Voltage Regulator: 0-15v, <4mv, < +/- 1% variation Slew Rates and Profiling: 100 us to 1000 ms in 100 us increments Current and Voltage Measurements: 0 to 5 Amps, +/- 10 ma of actual measurement Short and Open Circuits: > 1 Mohm open, < 0.1 ohm short Ripple and noise Injection: sine wave 10 Hz to 20 MHz in 10 Hz increments, +/- 2% of set amplitude accuracy, sine output 0 to 2 V P-P in 8 mv increments External Motion Sensor: 0 to 100 mv P-P, 1 Hz to 3 KHz. Includes a full warranty and technical support. I work for FLexstar and handle e-commerce sales, you will be invoiced from Flexstar. PayPal and CC are ok company checks or POs are OK Place a Bid!